Rigging and millwrights

Every move.Set true.

Ribbiot runs the move on one record, from the quote to the invoice: the rigging plan, the gear, the crew, the plant's requirements, the set, the hours, and the extras, so the office, the yard, and the field run on the same truth.

Walk one job

Bring one job to a 60-minute discovery call. We walk it with you from the quote to the invoice and show what one record changes at each handoff.

A hydraulic gantry lifting a tarped machine inside a plantA rigger reaching for a hook block at sunsetA millwright welding a steel column
Rigging, machinery moving, and millwrighting: planned, rigged, set, and billed on one record
Built for the realities of the field
The daily reality

The plant is down Saturday. The gantry is on another job.

A move is a configuration twice over. The piece sets the gear: the gantry or the forklift, the skates and the jacks, the spreader bars and the slings, and often a crane for the lift at the door. The plant sets the rest: the shutdown window, the route through the building, the clearances, the badge paperwork and the site training, and the hours the millwrights get to set, level, and align the piece. All of it is lined up by phone and whiteboard, and the day it moves is the day everyone finds out what was missed.

01

Gear in the wrong place

The gantry is on one job, the skates and the toe jacks are in a truck on another, the slings signed out are still out, and the rigging plan calls for all of them Saturday.

A crew standing in a shutdown window the customer will not extend.

02

Compliance risk

The plant's own requirements, the site training records, the rigging gear inspections, and the operator certifications live in binders and personal files, and the gate asks for them at 6 a.m.

The move waits at the gate while someone drives the paper over.

03

Missing field truth

A move grows on the floor: an extra pick, a second shift, an anchor bolt pattern that did not match the drawing. The hours and the extras come back on paper days later, if they come back at all.

A customer who disputes the extra pick three weeks after nobody wrote it down.

From the quote to the field to the invoice

Readiness before the move. Visibility while it runs. Clarity when it closes.

The quote, the rigging plan, the gear and crew schedule, the work order on the rigger's phone, the signed ticket, and the invoice are one record. The shop, the floor, and the office see the same move while it runs, and the accounting system gets the result when the machine is set and aligned.

Included in the platform
ArsenalArsenal

The gear, its inspection, and whether it can go out

Arsenal gives the gantry, the forklifts, the skates, the toe jacks, and every sling, shackle, and spreader bar its own record, owned, rented, or staged, with its inspection, its capacity, and its status. The move is planned from gear the shop knows is ready, and the rigger opens the inspection from the record at the gate.

RosterRoster

Who can work Saturday

A shutdown move is staffed from Roster: every rigger, operator, and millwright with a role and their availability, so the Saturday crew comes off the record and nobody calls around on Thursday to find out who can work the weekend. The site training record and the operator certification ride with the move as documents.

IntelIntel

Planned resources for every move

The accepted quote becomes the plan automatically, and Intel, Ribbiot's AI, adds planned resources for the crew and equipment each move requires. Sales or project management confirms them before the job goes to dispatch. Intel also reads every daily report as it lands and flags what needs attention. Intel proposes and a person confirms.

The modules
Pursuit

Quotes that carry the gear and the window

Every move is priced in Pursuit from one price book and one template, so every estimator quotes the gantry, the skates, the millwright hours, and the shutdown window the same way. The accepted quote is the plan, with nothing retyped between the two.

Command

Scheduling and dispatch

Command builds the move from the gantries, forklifts, trailers, and crews that are actually free, and the crane if the lift at the door needs one, so a double-booking shows at planning instead of on the plant floor. A shutdown that slips a day slips the gear, the riggers, and the millwrights.

Capture

Hours from the floor, the same day

Capture puts the forms crews already know on the phone: the timecard, the daily report, the job safety analysis, and the customer's sign-off on the extras, submitted against the work order the same day and built to work where the plant floor has no signal.

Secure

Payroll and billing from the record

Secure turns the approved hours and the signed ticket into payroll-ready and invoice-ready records, with the extra pick and the second shift on the invoice because they were captured when they happened.

Track

Where the gear is

Track puts live location and tap-to-access documents on the skates, the jacks, the chain falls, and the spreader bars telematics never covered, so the shop stops renting a set of skates it already owns. No hardware is required to be a customer.

The platform

One platform. The whole job.

Start on the workflow that hurts most and add the next when the office and the field trust what they see.

Explore the platform ↗
See the difference

The same week, in the fog and on one record.

A staged picture: a handwritten extra work order on a clipboard on a forklift seat, the customer's signature line empty, a tarped machine under a hydraulic gantry on the plant floor beyond.
Without Ribbiot

In the fog.

  • A gantry is promised to two moves.
  • Slings go back on the rack with no inspection.
  • Badge paperwork and site training are found missing at the gate.
  • The extra pick is argued after the invoice.
  • The move is rebuilt on Monday from the riggers' texts.
  • A gantry is rented while the company's own sits on a finished job.
  • The rigging plan is retyped from the quote to the ticket.
  • Margin on the move is known a month after the plant restarts.
A composite picture: a hand holds a phone showing a crew timecard signed by the customer in the Ribbiot mobile app, a hydraulic gantry over a tarped machine in a plant behind it. Example data.
With Ribbiot

On one record.

  • The gantry, the skates, and the crew are committed once, to one move.
  • Every sling, skate, and spreader bar is on the record, with its inspection and location.
  • The plant's requirements are on the job before the crew rolls.
  • The hours and the extras are on the record the day of the move.
  • The extra pick is signed for on the floor, so it gets billed.
  • A missing training record shows at planning, before the plant gate.
  • The move is entered once, from the quote to the invoice.
  • Margin per move shows while the decisions that set it are still in reach.
Also built forIndustrial turnaround

Remove the Fog of Operations

Bring one job.Get a clearer operating picture, from readiness to revenue.

Walk one job